Technical Characteristics

/Technical Characteristics
Technical Characteristics 2017-09-26T18:35:35+00:00

Incision Colle

ΤΟΜΗ ΣΥΛΛΕΚΤΗ

tor Cross Secti

ΘΕΡΜΟΔΟΧΕΙΟ ΜΑΚΕΤΑ

FULL RESISTANCE TO THE SEA WATER

The Bauer’s outer shell is RAL 9006 particularly resistant to ultraviolet rays, wet climates and seaside areas. Its design offers unique mechanical strengths to the lining of the tank without screws and rivets.

BAUER IS FROST RESISTANT

The design of the Bauer’s closed-circuit cloak guarantees stable operation even with frost, also protecting collectors from the risk of being blocked by salts.

BAUER PROVIDES YOU WITH HOT WATER AT WINTER

The solar we need it all the year, but more in the winter. This is why the strong 50 mm thick polyurethane insulation with a high density of 40 Kg / m³ ensures more hot water even if the outside temperature is well below zero.

BIG LIFE EXPANDACY

The metal construction of the Bauer tank is 3 mm ST 37 and you make it according to DIN 15085 and try at a hydraulic pressure of 22 bar (incredible, yet we invite you to see it live) This means huge strengths of the container at high pressures of the network , unlike most common solar water heaters.

RESISTANCE TO HARSH WATER

solar water heaters – are protected against corrosion, inside the tank with GLASS ENAMELING with elastic properties. This protection method is considered to be the most effective for protecting the tank in very harsh water, its elastic properties allow it to follow the metal paths (contraction-expansion) of the tank, thus avoiding the risk of cracks created in most tanks with a different enamel protection. Bauer manufactures solar water heaters with stainless steel tanks (INOX 316L)

COOPERATION WITH THE BOILER 

Three-energy solar water heater.On request, Bauer has added a heated heating circuit that is also connected to the radiator (not to the resistor), thus achieving greater economy.

BAUER SOLAR COLLECTORS ARE RESISTANT TO AGE

Most almost solar panels generate condensation in the winter (especially in wet climates) due to the temperature difference, resulting in corrosion on the collector’s absorbent surface. The profile with which Bauer’s solar collectors are built prevents this phenomenon.

THE BAUER COLLECTOR WORKS BETTER 

Because the absorber is made of a titanium-coated sheet and copper tubes whereby mechanical tightening at 3/4 of the tube achieves absolute temperature transfer and the solar collector has the highest possible performance

COLLECTOR BAUER FUNCTIONS WITH DIRECT & INDIRECT SUN RAYS 

The titanium-coated surface of the collector combined with its prismed TEMPERED GLASS crystal mirror prevents the reflection of direct light and makes the collector a unique high performance.

WITHOUT LOSSES 

40 mm fiberglass insulation and 20 mm fiberglass sidewall to minimize the losses of the Bauer solar collector

SAFETY – RELIABILITY – PREVENTION 

All Bauer solar panels feature safety glass for hail resistance and accident prevention. has a TEMPERED GLASS 4 mm special following strict international safety regulations

EASY INSTALLATION

The excellent design of the solar system coupled with the well-designed base provides the ability to easily place the sun on a terrace and on tiles.

INNOVATION

Bauer solar collectors and solar water heaters are manufactured under the strictest European standards and their construction is checked at every stage of production

 

Χρησιμοποιούμε cookies για την καλύτερη εμπειρία των επισκεπτών. Περισσότερα

Η συγκεκριμένη ιστοσελίδα χρησιμοποιεί cookies για την καλύτερη εμπειρία των επισκεπτών. Συνεχίζοντας την πλοήγηση χωρίς να αλλάξετε τις ρυθμίσεις των cookies ή δεν κάνετε click στο "Αποδοχή" τότε συμφωνείτε με τους όρους.

Κλείσιμο